How to disassemble the air filter
Release time:
2023-06-14
The air filter is located on the right side of the engine compartment of the car. That is, above the right front wheel, a black square plastic box connected to a thick and soft rubber hose for the arm. What is the disassembly method of the air filter? Are there any specific skills and methods?
How to disassemble the air filter
Gently break open the two metal clips facing the rear of the car, lift the entire air filter box cover forward, and take out the filter element for arrangement.
1. When removing the filter, if the rubber hose is involved, use the Phillips screw to loosen the clamp and remove one end.
2. If other obstructions are encountered when the filter is disassembled, remove it carefully.
Air Filter Replacement
According to the use environment, the air filter generally needs to be cleaned every 1-3 months. If you pass through areas with heavy dust, the cleaning cycle should be appropriately shortened.
Take out the air filter element and knock off the dust, blow it with a high-pressure air nozzle, and blow off the air intake box. Be careful not to get too close, or use a bicycle pump, or handle with a soft brush.
1. The air filter element should not be washed with water
2. There should be no moisture left in the intake box
3. The damaged air filter element must be replaced in time
Be sure to remember the procedure when removing the air filter. If the filter is not installed smoothly, you should find out the reason and continue without using brute force. If the filter cannot be installed, you can not install the filter element first, take out the trivial items in the box, cover the lid back, put the pipe back, and drive to the repair shop for processing.